PILING SERVICES
The Hydraulic Static Pile Driver Injection System has the features of no pollution, no noise, no vibration, and fast pile driving. It represent the future development tendency of pilling machinery. Contact us for more detailed information.
120 Ton - TECHNICAL SPECIFICATION
320 Ton - TECHNICAL SPECIFICATION
420 Ton - TECHNICAL SPECIFICATION
The Bore pile, also called drilled shaft, is a type of reinforced-concrete foundation that supports structures with heavy vertical loads. A Bore pile is a cast-in-place concrete pile, meaning the pile is cast on the construction site. This differs from other concrete pile foundations, like spun pile and reinforced concrete square pile foundations, which use precast concrete piles. Bore piling is commonly used for bridge work, tall buildings, and massive industrial complexes, all of which require deep foundations.
XR160E - TECHNICAL SPECIFICATION
XR180DII - TECHNICAL SPECIFICATION
Diesel pile hammer, is a large two-stroke diesel engine. The weight is the piston, and the apparatus which connects to the top of the pile is the cylinder. Piledriving is started by raising the weight; usually a cable from the crane holding the pile driver — This draws air into the cylinder. Diesel fuel is injected into the cylinder. The weight is dropped, using a quick-release. The weight of the piston compresses the air/fuel mixture, heating it to the ignition point of diesel fuel. The mixture ignites, transferring the energy of the falling weight to the pile head, and driving the weight up. The rising weight draws in fresh air, and the cycle continues until the fuel is depleted or is halted by the crew.
DIESEL HAMMER - TECHNICAL SPECIFICATION
